PRESCRIBED TORQUE:
LENGTH FROM CENTRE OF THE HANDLE TO THE TOP (l1):
GAUGE DIMENSION OF THE INSERT TOOL (l2):
GAUGE DIMENSION OF THE NEW INSERT TOOL (lW):
TORQUE TO BE SET
Warning: The torque to be set is outside the permissible range for your torque spanner.
BackContinueFORM FOR TORQUE CORRECTION
INSTRUCTIONS
When using torque wrenches with insert sockets, it should be noted that different insert tools can have different effective lengths. This can alter the torque applied to the nut or the bolt.
You can easily calculate the torque to be set for your torque wrench with the respective insert tool:
use our app to determine the necessary setting to apply the desired torque to the nut or bolt.
This programme is based on the following formula for torque correction with effective length change:
| MDE = | (l1 + l2) x MDV | ; here: |
| l1 + lW |
| MDE | = | torque to be set on the torque wrench in Nm |
| MDV | = | prescribed torque for the screw connection in Nm |
| l1 | = | length from the centre of the handle to the top in mm |
| l2 | = | gauge dimension of the insert tool with which the torque wrench was calibrated in mm |
| lW | = | gauge dimension of the new insert tool in mm |
If you have any questions, please contact your specialist dealer or HAZET directly at
info@hazet.de
or
+49(0)2191/792-0
EXCLUSION OF LIABILITY
The calculation programme was checked and tested with respect to its correctness. HAZET is not liable for personal and/or material damage due to misuse of the programme. In the case of critical applications, it is imperative that the determined values are checked for correctness, where applicable with a suitable torque tester.
FIRST PLEASE ENTER THE PRESCRIBED TORQUE FOR THE SCREW CONNECTION IN NEWTON METRES...
Continue
BackContinueSELECT YOUR HAZET TORQUE KEY FROM THE LIST OR CLICK NEXT TO DIRECTLY ENTER THE MEASUREMENT FOR l1.
BackContinueNOW PLEASE SPECIFY THE GAUGE DIMENSION OF THE INSERT TOOL >WITH WHICH THE TORQUE WRENCH WAS CALIBRATED...
BackContinueNOW SELECT THE NEW HAZET INSERTION TOOL FROM THE LIST OR CLICK ON NEXT AND ENTER THE DIMENSION.
BackContinue